一、保存放置
1、 Save Placement
禁懸空放置：放置于兒童不容易接觸到的地方，以免小朋友不小心掉落模型，不但是模型損壞更有可能會傷害到小朋友。
Prohibited hanging placement: Place in a place that is not easily accessible to children to prevent them from accidentally dropping the model. Not only is the model damaged, but it is more likely to harm children.
禁高溫照射：不要長期暴露在陽光或高射燈下直射，容易造成漆面和塑料配件老化、變形、皺裂。
High temperature exposure prohibited: Do not expose to direct sunlight or high beam lamps for a long time, as it can easily cause aging, deformation, and cracking of the paint and plastic parts.
忌潮濕環境：如果鋅合金模型長期放在較為潮濕的地方，模型表面的合金就會容易氧化，起黑點、漆面起泡等現象，所以盡量保持放置放置環境的干燥。
Avoid damp environments: If the zinc alloy model is left in a relatively damp place for a long time, the alloy on the surface of the model will be prone to oxidation, black spots, paint bubbles, and other phenomena. Therefore, try to keep the storage environment dry as much as possible.
留下包裝盒：這不但影響模型的觀賞度，更重要它會直接影響汽車模型收藏的價值和再次出售的價格。
Leave the packaging box: This not only affects the viewing quality of the model, but more importantly, it directly affects the value of the car model collection and the resale price.
二、鑒賞把玩
2、 Appreciation and play
切勿用力過猛：高仿真模型都是許多零件組裝的，有些零件特別細小，所以定要做到防摔、防震、防壓，動手時候要小心仔細，切勿用力過猛造成零部件損壞。
Do not use excessive force: High simulation models are assembled with many parts, some of which are particularly small, so it is important to be anti drop, shockproof, and anti pressure. Be careful when handling, and do not use excessive force to cause damage to the components.
三、保養維護
3、 Maintenance
清理灰塵：定期使用用軟毛刷撣灰、吹風機等工具對模型表面的灰塵進行擦拭。
Cleaning dust: Regularly use tools such as a soft bristle brush or hair dryer to wipe the dust on the surface of the model.
漆面打蠟：合金模型一般放置二到三個月后就需要使用蠟或碧麗珠擦洗表面防銹。但需要注意的是每次打蠟要薄、勻、少。蠟多了就容易嵌進模型的縫隙里。
Waxing of paint surface: Alloy models generally require the use of wax or beryl to scrub the surface for rust prevention after being placed for two to three months. But it should be noted that each wax application should be thin, uniform, and minimal. Too much wax can easily fit into the gaps of the model.
This article is written by a large aircraft model. For more products and detailed exciting content, please follow our website: http://m.zaiguo.cn We will present more content for you.
