After the industrial model is made, it needs to be accepted to ensure that the produced model meets the marketing strategy and appearance requirements of the display company. If there are errors and emergencies after the industrial model is made, it is convenient to make changes in time. In order to avoid that the display company needs to modify the details after the completion of the industrial model, the person in charge of the display company needs to be invited for acceptance after the preliminary production to ensure that the industrial model and design drawings are correct. The acceptance process needs to be provided for the acceptance personnel to accept

一、仿真度與精細度

1、 Simulation and precision

1.工業模型制作都是按照工業設備進行縮小或放大，所以在制作后需要對其模型的外觀尺寸進行確認，是否符合設計圖紙的制作要求。

1. All industrial models are reduced or enlarged according to industrial equipment, so it is necessary to confirm the appearance size of the model after production and whether it meets the manufacturing requirements of the design drawings.

2.這里需要展示公司負責人進行現場核對，從而避免圖紙與設計圖紙中存在的尺寸差異，也是雙方公司進行現場確認工業模型的道流程。

2. It is necessary to show the person in charge of the company for on-site verification, so as to avoid the size difference between the drawing and the design drawing. It is also the first process for the two companies to confirm the industrial model on site.

二、結構

2、 Structure

1.工業模型展示的主題也是存在不一致的，有的公司模型展示工業產品的外觀，有的展示工業產品的內部結構，還有的展示其產品的工作原理。

1. The theme of industrial model display is also inconsistent. Some company models show the appearance of industrial products, some show the internal structure of industrial products, and others show the working principle of their products.

2.在進行驗收時，注意工業模型的展示主題，進行確認其內部構造與外觀問題。

2. During acceptance, pay attention to the display theme of the industrial model and confirm its internal structure and appearance.

三、燈光效果

3、 Lighting effect

1.燈光效果在工業模型中不是哪里都能使用的到，有些需要動態演示的工業模型需要設置燈光，以達到工業產品運行中的效果。

1. Lighting effects can not be used everywhere in industrial models. Some industrial models that need dynamic demonstration need to set lights to achieve the effect of industrial products in operation.

2.在這里需要對自身產品在運作中散發的光源進行確認，是否符合真實工業產品運行時的燈光場景。

2. Here, we need to confirm whether the light source emitted by our own products in operation conforms to the lighting scene of real industrial products in operation.

四、污漬處理

4、 Stain treatment

1.在制作工業模型后，模型會留下一些比較難處理的污漬，污漬處理不好將影響到工業模型的展示效果，在驗收時，注意工業模型周邊是否存在污漬，如有則要求模型公司進行處理。

1. After making the industrial model, the model will leave some stains that are difficult to deal with. Poor treatment of the stains will affect the display effect of the industrial model. During acceptance, pay attention to whether there are stains around the industrial model, and if so, require the model company to deal with them.